Patented Crawlspace Wall Vapor Barrier Is in Production

We’re beginning our first full production run of our patented vapor barrier and pier and wall liner. What makes it unique is the ability to cost effectively install it on a crawlspace wall without the need for mechanical fasteners or toxic and flammable adhesives. Using a furring strip or plastic fastener increases the installation labor exponentially. Anyone who has ever used a masonry bit to drill a hole in concrete, even using a hammer drill, know what I’m talking about. Try to imagine drilling one of those holes every two to three feet around the perimeter of a crawlspace foundation wall. That increases the time necessary to install a wall vapor barrier by hours as well as creates a lot of dangerous concrete dust.

One of our primary business concerns has always been the health and safety of our customers and their families. The patented YourCrawlSpace wall liner is applied using a low VOC, water-soluble adhesive. No potentially explosive and flammable adhesive fumes in your home. No drilling holes in concrete or having to use a Ram-Set nail gun. The only thing necessary is a relatively inexpensive tube of nontoxic, non-flammable, water-soluble adhesive that you can buy in most any hardware store.

The patented wall material is easily installed by two workers. One leads the way by placing a 1/4” to 3/8” bead of adhesive along the top of the crawlspace wall and the other follows by pushing the gluing-strip of the wall vapor barrier into the adhesive. I personally wrapped more than 20 piers and installed the wall vapor barrier in a large Charleston, SC home in just a couple of hours. Whether you’re a professional installation contractor doing two or three encapsulations per week or a homeowner interested in making your home a healthier, safer and more economical place to live, give us a call to discuss the availability of our patented wall liner. We can save you a lot of time and save you money in the process.